For assistance in assembling product, missing or damaged parts, or to place an order, please contact customer
service at 800-328-1061.
You may also place your order online at
Form #179977
04/2018
Step 13
: If the Top is still not level after Step 12, use the Beam Plate Screws shown below to adjust
the level of Top an additional amount.
Step 14:
If needed, fine adjustment of the level of the Table can be accomplished by using the
Knurled Disks just above each Caster.
Lift up on the corner of the Table slightly to lessen the
weight on the caster and twist or turn the Knurled Disk to raise or lower that corner of the
Table. The Knurled Disk is normally set to the lowest position so try raising the corners of the
Table that are low first.
BEAM PLATE
