Document #: 179688
REVISED: 10/2020
5.
Position the base onto the bottom of the column as shown, lining up the three screw
holes. First,
install the 5/16”
-
18 x 3/4” Flat
-Head Bolt into the base and the bottom of the
column, but do not fully tighten it yet. Then install the two #10-
32 x 1/2” Flat
-Head Bolts
from the underside of the column to the base. Now tighten all bolts to secure the base.
6.
Place wood top on clean smooth surface upside down with the pilot holes facing up.
Place top mount plate on top and line up the holes. Install
#10 x 5/8” Flat
-Head Wood
Screws through the top mount plate into the wood top.