Document #: 179688
REVISED: 10/2020
3.
Flip the column over so that it is resting on the top mount plate
.
4.
OPTIONAL:
Place base with bottom side facing up (this side has a large hole with
countersink for the 5/16”
-
18 x 3/4” Flat
-Head Bolt. Peel off paper backing to felt and
attach the felt to the bottom side of the base.
Felt should have an 1/8” gap from the edge
of the base all the way around.
Helpful Hint:
Peel off part of the backing of felt at the triangular piece and stick to base.
Pull off the backing on one side completely and attach it to the base carefully. Then do
the same on the other side.
Helpful Hint:
Do this step if you will be using the table on a hard surface such as wood
flooring. The felt is not recommended to be used on carpet.
