Document #: 179688
REVISED: 10/2020
Assembly Instructions
1.
Place column standing up on a clean smooth surface that will not harm the paint finish.
The column should be in this position.
2.
Position the top mount plate onto the top of the column as shown, lining up the three
screw holes. First, install
the 5/16”
-18
x 3/4”
Flat-Head Bolt into the top mount plate
and the top of the column, but do not fully tighten it yet. Then install the two #10-32 x
1/2”
Flat-Head Bolts from the underside of the column to the top mount plate. Now
tighten all bolts to secure the top mount plate.
BOTTOM
(ON FLOOR)
TOP
