USER’S GUIDE
11
2015
3 SAVE SETUP
I
n the save setting menu only the setting
number is display in the upper right corner.
Pressing SELECT will overwrite the setting
at that memory location with the current
waveform parameter settings. The display will
then return to a Status Display.
Example:
4 TIMER
The TIMER button allows the pulse timer to be
changed. When the pulse TIMER is enabled
the output is only active for the set number of
seconds after the output switch is pressed and
then the output automatically stops. With the
Wave Time disabled the output remains active
for as long as the output button is held on.
Pressing the Timer button displays the current
setting which can be changed by pressing the
up or down arrow until the desired setting is
displayed and then pressing SELECT. After
pressing SELECT the display will then return to
Status Display.
Like most wave settings menus if Dual mode
waveform is enabled the first display will
show the Primary waveform setting for that
parameter. Pressing SELECT, whether or not a
change is made, will switch the display to the
Secondary waveform setting.
PES
®
MENU GUIDE
1 STATUS DISPLAY
On Startup and at the end of various other
menu operations the PES® displays the current
Status. There are 3 or 4 Status displays. If a
menu button is pressed while in another menu
the PES® returns to the status display. The
default is to display the current waveform
settings such as these:
The up or down arrow (
or
) will cycle the to
one of the other Status displays like these:
2 LOAD SETUP
There are 10 settings in memory. Pressing
LOAD SETUP will display one of these settings.
The setting number is shown in the upper
right corner of the display. The up and down
arrows will cycle through all settings from 0
to 9. Pressing SELECT will load the displayed
setting, display a message to that effect and
return to the Status Display.
Note: For the Dual mode settings the Primary
(Pri) waveform is displayed first regardless of
which arrow is pressed. The Secondary (Sec)
wave form is only displayed if the up arrow is
pressed while viewing the Primary waveform
setting.
Example settings:
