9
10600266 Rev. E
DYONICS™ Handpieces
Instructions for Use
The suction lever on the Mini Motor Drive handpiece
rotates to the left and the right (Figure 4). For maximum
suction, position the lever so that it is in line with the
handpiece. To reduce suction, rotate the lever away
from the center position, in either direction.
Hand-Control Handpieces
The hand-control handpieces (REF 7205354,
REF 7209891, REF 72200616, REF 72200872, and
REF 7210542) feature push-button controls for Forward,
Reverse, Oscillate, Blade Window Lock, and Speed
Shift on the distal end of the handpiece. With these
models, blade action can be controlled with either the
handpiece (Table 1) or the footswitch.
The DYONICS™ POWERMINI™ (REF 72201500) features
push-button controls for Forward, Reverse, Oscillate
and Blade Window Lock (Figure 4). The distal button
activates Forward and Reverse. The proximal button
activates Oscillate and Blade Window Lock.
Note:
The DYONICS POWERMINI Handpiece uses only
the DYONICS POWERMINI Blades.
Non-Hand-Control Handpieces
The non-hand-control handpieces (REF 7205355,
REF 72200617, REF 7210586, REF 7205357, REF 7205971,
and REF 72201503) are hand-held motor drives that are
electrically connected to the control unit via a 10-foot
(3-meter) cable. The non-hand-control handpieces
are activated by a footswitch. These handpieces run
a variety of DYONICS Disposable Endoscopic Blades.
The handpieces are designed to sense the blade
type installed and communicate that information to
the control unit, which sets the appropriate operating
parameters for the blade.
The DYONICS POWER Ultralight Motor Drive
(REF 7205971) is designed for optimum weight reduction
and does not sense blade type. The Smith & Nephew
Ultra Series Curved Blades and the Ultra Series
TURBOWHISKER™ Blade are required for curved blade
applications using the Ultralight Handpiece. Standard
curved blades and the standard TURBOWHISKER Blade
will not operate in the Ultralight Motor Drive. When
using the Ultralight Motor Drive, footswitch operation is
the same as with the standard handpiece.
The DYONICS Mini Motor Drive (REF 7205357), activated
by a footswitch, is designed for arthroscopic procedures
on small joints and for FESS applications.
Note:
The DYONICS Mini Motor Drive Handpiece uses
only the DYONICS Mini Blades.
Note:
The DYONICS POWERMINI Handpiece uses only
the DYONICS POWERMINI Blades.
Instructions for Use
(continued)
Summary of Contents for 7205354
Page 1: ...DYONICS Handpieces Instructions for Use 10600266 Rev E ...
Page 2: ......