IR lamp control module - HELCON 11XX series -
Installation, use and maintenance manual - EN
Ver. 1.02
34
8 Firmware upgrade
Following significant improvements or additional functionalities, the IR lamp control module can be updated
with a more recent firmware version.
This operation can be carried out through FLxIO field bus (remote programming); if the master device recog-
nizes that the module is programmed with a different FW version as compared to the version loaded in the
memory, it automatically re-programmes it. The procedure can be carried out when the devices are started. It
is not possible to upgrade a device directly.
To upgrade the IR lamp control module, it is necessary to upgrade the FW of the master device, which will then
upgrade the slaves.
