2
FlashRunner Quattro User's Manual
The data to be programmed is taken from the image file starting at
$EE00 (offset from the beginning of the file), is programmed to the
target microcontroller starting from the location $EE00 and is 4608
bytes long.
The
TPSETSRC
command specifies the source file for the
TPCMD
PROGRAM
e
TPCMD VERIFY
commands that come next. All the actual
programming operations are sent between a
TPSTART
and
TPEND
command. The
TPCMD SETPWD
command sets the security bytes
needed to perform subsequent operations.
After sending these commands, the Control Panel will look like the
figure below.
Figure 2.5: FlashRunner Control Panel, Target Device Programmed
11. We are now done with programming the target device. Click the
“Disconnect”
button to free the serial port resource.
25