2
System Setup
1. Launch the FlashRunner Control Panel utility. Select
Start > Programs
> SofTec Microsystems > FlashRunner > Control Panel
. The Control
Panel utility will open.
2. To establish a connection with FlashRunner, on the
“Communication
Settings”
section, select:
“FlashRunner serial version”
(if you are connected to FlashRunner through a serial port), or
“FlashRunner LAN version”
(if you are connected to FlashRunner through an Ethernet port).
Next, specify:
The COM port you are using and the baud rate (for the serial
connection—by default, FlashRunner communicates at 115200
bps), or
The instrument IP address (for the Ethernet connection). For
learning how to set up the FlashRunner IP address, please refer to
the FlashRunner Programmer’s Manual.
20