manualshive.com logo in svg

SMH Technologies FlashRunner Cube Series, User Manual, Page: 12 / 68

Share
Download
SMH Technologies FlashRunner Cube Series User Manual Download Page 12

FR CUBE-At a Glance

10

1

Features

 

Support of microcontrollers, serial and parallel memories, CPLDs  

and other programmable devices

 

High-speed, parallel programming

 

Compact size (fixture friendly)

 

Standalone operations or host controlled

 

Designed for easy ATE interfacing

 

Robust and reliable

 

Support of several programming interfaces (JTAG, BDM, SPI, I

2

C, 

UART, etc.)

 

Large built-in internal memory for projects, images, etc.

 

Programmable power supply output (1.5-13V)

 

Programmable I/O voltage (1.6-5.5V)

 

High-speed I/O

 

USB, LAN (isolated), RS-232 (isolated) and low-level interface (isolated)

 

ISP I/O relay barrier (only available on the single-site model)

 

I/O protection

 

Wide range power supply (12-25V)

The shortest possible programming times are guaranteed due to a 

combination of highly optimized programming algorithms, local storage of 

programming data and high slew rate line driver circuitry.

http://smh-tech.com.cn  [email protected]  +86-15250087885

Summary of Contents for FlashRunner Cube Series





































































Reviews:

No comments