background image

17 / EN

Washing Machine / User’s Manual 

Press the 

Temperature Adjustment

 button to change the temperature. Temperature will decrease by 

increments of 10 °C.

Finally, “-” symbol indicating the cold wash option appears on the display. 

1888

88:88

-

C

0

C

No change can be made in programmes where temperature adjustment is not allowed.

You can also change the temperature after the washing starts. This change can be made if the washing steps 

allow it. Changes cannot be made if the steps do not allow it. 

C

If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for 
the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature.

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is 

displayed on the 

Spin Speed

 indicator.

C

It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current 
programme.

1888

88:88

88 

C

0

Press the 

Spin Speed Adjustment

 button to change the spin speed. Spin speed decreases gradually.

Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.

C

Spin Speed Adjustment button only serves for decreasing the spin speed.

Rinse Hold option is indicated with “ı_ı” symbol and No Spin option is indicated with “_” symbol.

If you are not going to unload your laundry immediately after the programme completes, you can use 

Rinse 

Hold

 function in order to prevent them from getting wrinkled when there is no water in the machine.

This function holds the laundry in the final rinsing water.

88:88

88 

C

0

If you want to spin your laundry after the Rinse Hold function:

Adjust

 the Spin Speed

.

Press

 Start / Pause / Cancel

 button. The programme resumes. Machine spins the laundry by discharging 

the water.

If you want to discharge the water at the end of the programme without spinning, use 

No Spin

 function.

Summary of Contents for WHTS914LSSA



























Reviews: