background image

Cleaning and maintenance

81

EN

Cleaning the igniters and thermocouples

•  If necessary, clean the igniters and 

thermocouples with a damp cloth.

•  If there is any dry residue, remove it with 

a toothpick or needle.

Cleaning the oven cavity

In order to keep your oven in the best 
possible condition, clean it regularly after 
letting it cool down.
Avoid letting food residue dry inside the 
oven cavity, as this could damage the 
enamel.
Take out all removable parts before 
cleaning.
For easier cleaning, we recommend 
removing:
•  The door
•  The rack/tray support frames
•  Removable guides, where fitted
•  The seal

Regeneration of self-cleaning panels 
(catalytic cycle)

The regeneration cycle of the self-cleaning 
panels is a cleaning method through 
heating suitable for removing small grease 
residues, not sugar-based ones.
1. Clean the base and the upper section 

first with a microfibre cloth soaked in 
water and neutral washing up liquid. 
Rinse thoroughly.

2. Set a regeneration cycle by selecting a 

fan assisted function at the maximum 
temperature for one hour.

3. If the panels are particularly dirty after the 

regeneration cycle, remove them and 
wash them with neutral washing up 
liquid. Rinse and dry them.

4. Put the panels back in the oven and set a 

fan assisted function at a temperature of 
180°C for one hour, in order to ensure 
that they are thoroughly dry.

In the event you are using specific 
cleaning products, we recommend 
running the oven at maximum 
temperature for 15-20 minutes in 
order to eliminate any residue.

We recommend carrying out the 
self-cleaning panel regeneration 
cycle every 15 days.

Summary of Contents for TR90P9



















































Reviews: