background image

GB

5019 612 10179

Programme

Care

Labels

Max.

Load

kg

Type of wash / Notes

- for temperature selection, respect the manufacturer's recommendations on the care label

Detergents and Additives

Special options

Max.

Spin 

Speed

rpm

Pre- 

wash

Main 

Wash

Softener Start

delay

Avvio

ritardato

Pre-

wash

Pre-

lavaggio

Cold

wash

Lavaggio

a freddo

Intensive

rinse

Risciacquo

intensivo

Rinse

Hold

Anti piega

Variable

spin

Centrif.

Cotton

40 - 60 - 95 °C

Cotone

40 - 60 - 95°C

5.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made 

of cotton and linen.

For washing heavily soiled laundry, the “Prewash” option can be selected.

Selecting “Cotton 95”, this programme eleiminates bacteria, ensuring sanitization of your 

laundry. The bacteria removal efficiency has been tested following a similar methodology to 

the NF EN 13697 standard of Nov. 2001.

Yes 

1)

 2)

Max

Synthetics

30 - 40 - 60 °C

Sintetici

30 - 40 - 60°C

2.5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), 

polyamide (Perlon, Nylon).

Yes 

1)

 2)

Max

Delicates

30 - 40 °C

Delicati

30 - 40°C

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Yes 

1)

 2)

Max

Daily load

40 °C

Misti

40°C

3.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

Yes

 2)

Max

Quick wash

30 °C

Rapido

30°C

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with 

cotton.

Yes

 2)

Max

Wool

20 - 40 °C

Lana

20 - 40°C

1.0

Only woollens with a felt-free finish, labelled with the woolmark and identified as 

machine washable.

Yes

 2)

Max

Handwash

30 - 40 °C

Lavaggio a 

mano

30 - 40°C

1.0

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

A very gentle spin is used in this programme.

Yes

 2)

400 

3)

Rinse & Spin

Risciacquo & 

Centrifuga

5.0

Same as the last rinse and the final spin in the “Cotton” programme.

Max

Spin

Centrifuga

5.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

Max

Gentle Spin

Centrifuga breve

1.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Max

Drain

Scarico

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

A.  Programme selector
B.  “Start delay” button
C.  Programme sequence indicator

 

(over the line)

 

Start delay indicator (under the line)

D.  “Variable spin” button
E.  “Start/Pause” button
F.  “Reset” button
G.  “Door open” indication

This washing machine is equipped with 
automatic safety functions which detect and 
diagnose faults at an early stage and react 
appropriately:
H.  “Service” indication
I.  “Water tap closed” indication
J.  “Clean pump” indication

1)

  Do not use liquid detergent for main wash if you

 

have activated prewash option.

2)

  Do not use liquid detergent.

3)

  For improved garment care, spin speed is restricted

 

to 400 rpm in this programme.

PROGRAMME CHART

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

A

B

H

F

E

G

C

D

J

I

Summary of Contents for TLS8-1


















Reviews: