background image

GB 6

To remove any residual water used in testing by the manufacturer, we recommend that you carry out a

short wash cycle without laundry.

1. 

 Open the tap.

2. 

 Close the drum flaps.

3.  

Add a small amount of detergent (maximum 1/3 of the quantity the detergent manufacturer

  recommends for lightly soiled laundry) to the main wash chamber      of the detergent dispenser.

4.

  Close the lid.

5. 

 Select and start programme “Synthetics” at 60°C (see separate the programme chart).

BEFORE THE FIRST WASH CYCLE

PREPARATION OF THE LAUNDRY

Sort the laundry

1.  Sort the laundry according to…

•  

Type of fabric / care label symbol

  Cottons, mixed fibres, easy care/synthetics,

  wool, handwash items.

•  Colour

  Separate whites and coloureds.

  Wash new coloured items separately.

•  Size

  Wash items of different sizes in the same load to

  improve washing efficiency and distribution in the

  drum.

• Fabric delicacy

  Wash delicate articles separately: use a special

  programme for Pure New Wool       , curtains

  and other delicates. Always remove curtain glides

  or wash curtains with the glides inside a cotton

  bag. Use the special programme for handwash

  fabrics. Wash stockings, belts and other small

  items or articles with hooks (e.g. bras) in special

  cotton bags for washing machines or in zipped

  pillow cases.

2.  Empty pockets

  Coins, safety pins and similar items can damage

  your laundry as well as the washing machine’s

  drum and tub.

3.  Fasteners

  Close zips and fasten buttons or hooks; loose

  belts or ribbons should be tied together.

Stain removal

•   Blood, milk, egg and other organic substances are

  generally removed by the enzyme phase of the

  programme.

•   To remove red wine, coffee, tea, grass and fruit

  stains etc. add a stain remover to the main wash

  chamber     of the detergent dispenser.

•   Particularly stubborn stains should be treated

  before the wash.

Dyeing and bleaching

•   Only use dyes and bleaches that are suitable for

  washing machines.

•   Follow the manufacturer’s instructions.

•   Plastic and rubber parts of the machine may be

  stained by dyes or bleaches.

Summary of Contents for TLS8-1


















Reviews: