background image

11

Instructions for the user

5. AVAILABLE ACCESSORIES

NOTE:

Some models are not provided with all accessories.

Rack: 

useful for holding

cooking containers.

Tray rack: 

to be placed

over the top of the oven

tray; for cooking foods

which may drip.

Oven tray: 

useful for

collecting fat from foods

placed on the rack

above.

The oven accessories intended to come into contact with food are made of materials that comply with
the provisions of current legislation.

Accessories available on request:

•  Original supplied and optional accessories may be ordered from any Authorised Support Centre.
•  Use only original accessories supplied by the manufacturer.

5.1

Using the rack or tray

The racks and trays are equipped with a mechanical safety lock which
prevents them from being taken out accidentally. To insert the rack or tray
correctly, check that the lock is facing downwards (as shown in the figure
at the side).
To remove the rack or tray, lift the front slightly.
The mechanical lock (or the extension piece where present) must always
face the back of the oven.

Gently insert racks and trays into the oven until they come to a stop.

In models with runners, clean the trays before using them for the first time. Cleaning will remove any
manufacturing residues, which may otherwise scratch the sides of the oven cavity when trays are being
inserted.

5.2

Using the support rack

The support rack is inserted into the tray (as shown in the figure). Using
this, foods can be cooked and the fat can be collected separately from the
food which is being cooked.

Summary of Contents for SUK62CBL8





























Reviews: