Rev 0.0
17
INSTALLATION INSTRUCTIONS
EN
5.2.1.2 Connecting the drain hose
Connecting to a drain
Insert the relative hose into a drain with a minimum diameter of
4 cm
(1-37/64”)
(ref. A fi g. 5-07); alternatively, place the hose on the sink (ref. B fi g. 5-07) using
the supplied hose support (see fi g. 5-08), but taking care to avoid obstructions
or excessive curving. Make sure the hose cannot fall out. For this purpose, the
hose support is fi tted with a hole (ref. A fi g. 5-08) which can be used to fi x it to
the wall or the tap with a piece of string. The free end must lie at a height rang-
ing from of
30 to 100 cm (from 1-7/32” to 3-59/64”)
(see fi g. 5-07) and must
never be immerged in water. If horizontal extension hoses with a maximum
length of 3m are used, position the drain hose at a maximum height of
85 cm
(3-11/32”)
above the fl oor.
Fig. 5-07
A
B
min O4 cm
1-37/64”
min 30 cm
1-7/32”
MAX 100 cm
3-59/64”
Fig. 5-08
A
Summary of Contents for STO905U
