10
Rev 0.0
USER INSTRUCTIONS
EN
SUPPLEMENTARY PROGRAMS
The supplementary program button (ref. 6 fi g. 2-02) adds
fi ve extra programs
to the ones that can be directly selected with the program selection button.
Press the button (the indicator light turns on)
after
selecting the “main” pro-
gram (see 1, 2, 3, 4, 5 in tab. 2-02a).
As the function
is memorized
, press the button again (the indicator light turns
off) if you wish to run one of the 5 main programs for the next cycle.
2.2.3
End of program
The end of the program is signaled by a short beep. Additionally, the indicator
lights of the “heavy wash” and “quick & intense” programs fl ash.
2.2.4 Interrupting
a
program
To interrupt the current program simply open the door of the dishwasher; to
restart the program, simply close the door again. The program restarts from
where it was interrupted.
If it is necessary to open the door during the washing cycle, the
program will be interrupted, the relative indicator light will continue to
fl ash and a beep will indicate that the cycle has not terminated. Wait
for about
1 minute
before closing the door and continuing with the
program. When the door closes, the program will start from where it
was interrupted. This operation should be performed
only if neces-
sary
as it could cause irregular program performance.
2.2.5
Changing the current program
To change the current program, simply open the door of the dishwasher and
select the new program. Close the door to run the new program automati-
cally.
2.2.6
Canceling the current program
To cancel the current program, open the door and press and hold down
the
program selection
button (ref. 3 fi g. 2-02) for a few seconds until the
indicator lights of the fourth and fi fth programs turn on (ref. pr. 4, pr. 5 fi g.
2-03).
•
Summary of Contents for STO905U
