background image

4

   EN

1.  Safety and operating instructions

THIS  MANUAL  FORMS  AN  INTEGRAL  PART  OF  THE  APPLIANCE:  IT  MUST 
ALWAYS  BE  KEPT  INTACT  TOGETHER  WITH  THE  DISHWASHER.  BEFORE 
USING  THE  APPLIANCE,  CAREFULLY  READ  ALL  THE  INSTRUCTIONS 
CONTAINED  IN  THIS  MANUAL.  INSTALLATION  MUST  BE  PERFORMED  BY 
A  QUALIFIED  TECHNICIAN,  IN  COMPLIANCE  WITH  THE  REGULATIONS  IN 
FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COMPLIES 

WITH THE 

EEC

 

DIRECTIVES 7

3

/23, 89/336 (INCLUDING 92/31

 and 93/68

)

CURRENTLY 

IN FORCE, INCLUDING  HE PREVENTION AND ELIMINATION OF

RADIO 

FREQUENCY INTERFERENCE. THE APPLIANCE IS DESIGNED FOR

THE 

FOLLOWING PURPOSE: 

WASHING

 

AND DRYING OF DISHES

; ANY OTHER

USE 

SHALL  BE  CONSIDERED  IMPROPER. 

THE  MANUFACTURER  DECLINES

ALL 

RESPONSIBILITY FOR

 

USES OTHER THAN THOSE DESCRIBED ABOVE.

THE  NAME  PLATE  FEATURING THE TECHNICAL  DATA,  SERIAL  NUMBER AND 
MARKINGS  IS  VISIBLY  POSITIONED  ON  THE  INNER  EDGE  OF  THE  DOOR. 

THE  NAME  PLATE  ON  THE  INNER  EDGE  OF  THE  DOOR  MUST

 

NEVER  BE 

REMOVED.

DO  NOT  LEAVE  THE  DISCARDED  PACKAGING  MATERIALS  UNSUPERVISED 
WITHIN  THE  HOME.  SEPARATE  THE  VARIOUS  MATERIALS  WHICH  MAKE 
UP  THE  PACKAGING  AND  TAKE  THEM  TO  THE  NEAREST  SORTED  WASTE 
COLLECTION CENTRE.

THE  APPLIANCE  MUST  BE  PROVIDED  WITH  AN  EARTH  CONNECTION  IN 
ACCORDANCE  WITH  THE  ELECTRICAL  SAFETY  REGULATIONS  IN  FORCE. 

THE  MANUFACTURER  DECLINES  ALL  RESPONSIBILITY  FOR  DAMAGE  TO 
PERSONS  OR  PROPERTY  RESULTING  FROM  THE  FAILURE  TO  EARTH  THE 
APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION.

IF  THE  APPLIANCE  IS  INSTALLED  ON  A  CARPETED  OR  COVERED  FLOOR, 
ENSURE THAT THE OPENINGS ON ITS UNDERSIDE ARE NOT OBSTRUCTED.

ALWAYS  SWITCH  OFF  THE  DISHWASHER  AFTER  EACH  USE  TO  AVOID 
WASTING ELECTRICITY.

OBSOLETE  APPLIANCES  MUST  BE  RENDERED  UNUSABLE.  CUT  OFF  THE 
MAINS  POWER  CORD  AFTER  UNPLUGGING  IT  FROM  THE  WALL  OUTLET, 
AND  MAKE  SAFE  ANY  COMPONENTS  WHICH  MIGHT  BE  DANGEROUS  FOR 
CHILDREN (LOCKS, DOORS, ETC.).

Safety instruction

Summary of Contents for STH903



































Reviews: