User instructions
30
EN
6. Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT
DESCRIPTION
E1
Acquastop failure
The anti-fl ooding system has been activated (for the
relevant models only).
The system is tripped in case of water leaks.
Contact the after-sales service.
E2
Safety level
The system which limits the water level inside the
dishwasher has been tripped. Interrupt the program
and switch off the dishwasher. Switch the dishwasher
back on, program it again and start the washing cycle.
If the problem persists, contact the after-sales service.
E3
Water heating malfunction
The water is not heated or the heating parameters are
not correct.
Repeat the washing program; if the problem persists,
contact the after-sales service.
E4
Water tamperature monitoring malfunction
Interrupt the program and switch off the dishwasher.
Switch the dishwasher back on, program it again and
start the washing cycle.
If the problem persists, contact the after-sales
service.
E5
Water intake malfunction
The appliance does not take in water or does not do
so correctly.
Check that the water connections are correct, the water
intake tap is turned on and the fi lter is not fouled.
If the problem persists, contact the after-sales service.
E6
Water pump-out malfunction
The appliance does not pump out the water or does
not do so correctly.
Check that the drain hose is not kinked or crushed
and that the sip and fi lter are not fouled.
If the problem persists, contact the after-sales
service.
