EN
User instructions
19
To add rinse aid:
• Open the door.
• Open the door
“S”
.
• Add the rinse aid until the container is full (approximately 140 cc).
The optical level indicator
“O”
on the side of the cap should be completely
obscured. Refi ll the rinse aid when the optical level indicator becomes
clear again, or when the rinse aid warning light illuminates.
• Close the door.
• Use a cloth to remove any spillage of rinse aid which might lead to the
formation of excess foam.
ADJUSTING THE RINSE AID DISPENSER SETTING
The dishwasher is factory set for medium water hardness. However it possible
to change the setting by turning the dispenser’s selector to the desired position:
the amount of rinse aid dispensed is proportional to the selector position.
•
The amount of rinse aid must be
increased
if the washed dishes
appear
dull or feature circular stains.
•
If, on the other hand, the dishes are sticky or have white streaks, it
is
necessary to
reduce
the rinse aid setting.
ADDING THE DETERGENT
After adding the detergent, to close the lid slide it in the direction shown by the
arrow as far as it will go then press gently to lock.
During washing, the dispenser will be opened automatically.
