EN
32
Rev. 0.1
5.4
Cleaning the fi lter unit
• Periodically inspect the fi lter unit (ref. A fi g. 5-04) and, if necessary, clean it
under running water (at room temperature), using a stiff brush. To remove
the fi lter, grip the tabs, turn anticlockwise and lift upwards;
• push the centre fi lter (ref. A fi g. 5-05) from the underside to remove it from
the micro-fi lter;
• separate the two parts which make up the plastic centre fi lter by pressing
the body of the fi lter in the zone shown by the arrows (ref. B fi g. 5-05);
• remove the centre fi lter by lifting it upwards.
• after cleaning, remount the fi lter unit, joining the two parts comprising the
centre fi lter by pushing slightly until they click into place; insert the centre
fi lter into the micro-fi lter (see fi g. 5-05). Reposition the fi lter unit (ref. A fi g.
5-04) into its seat, turning it clockwise until it locks.
B
B
A
Fig. 5-04
Fig. 5-05
USER INSTRUCTIONS
Summary of Contents for ST8646U
Page 2: ......
Page 4: ...EN 2 Rev 0 1...
Page 33: ...EN Rev 0 1 31 A B Fig 5 02 Fig 5 03 USER INSTRUCTIONS...
