EN
28
Rev. 0.1
Adjusting the upper rack
The upper rack can be set in three different positions on both sides. The rack
must be level on both sides.
To raise the rack (ref. A fi g. 4-15), lift it with the two handles (e.g.: ref. B fi g.
4-15) to the fi rst or second catch depending on the height required. To lower it
(ref. c fi g. 4-15), pull up the two release levers (e.g.: ref. D fi g. 4-15). This is also
possible with the rack loaded, but in this case when lowering the rack it should
be held steady with one hand to avoid knocking the dishes.
A
B
D
C
Fig. 4-15
USER INSTRUCTIONS
Summary of Contents for ST8646U
Page 2: ......
Page 4: ...EN 2 Rev 0 1...
Page 33: ...EN Rev 0 1 31 A B Fig 5 02 Fig 5 03 USER INSTRUCTIONS...
