Smeg ST4512IN, User Manual

Page: 20 / 28

4. To install the spray arm back, insert
the mounting element in the spray arm
and fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
TROUBLESHOOTING
WARNING! Improper repair of
the appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that can
occur can be solved without the need
to contact an Authorised Service
Centre.
Refer to the below table for information on
possible problems.
With some problems, the dedicated
indicator flashes intermittently to indicate a
malfunction and the alarm code.
Problem and alarm code Possible cause and solution
You cannot activate the appliance. • Make sure that the mains plug is connected to
the mains socket.
• Make sure that there is no damaged fuse in the
fuse box.
The programme does not start. • Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait
for the end of the countdown.
• The appliance recharges the resin inside the
water softener. The duration of the procedure is
approximately 5 minutes.
20