background image

If the door is opened for more

than 30 seconds during the

drying phase, the running

programme ends. It does not

happen if the door is opened by

Dry Assist function.

Do not try to close the

appliance door within 2 minutes

after Dry Assist automatically

opens it as this may cause

damage to the appliance.

If, afterwards, the door is

closed for at least 3 minutes,

the running programme ends.

Cancelling the delay start

Press the on/off button for 3 seconds until

the appliance is in programme selection

mode.

When you cancel the delay start, you have

to set the programme again.

Cancelling the programme

Press the on/off button for 3 seconds until

the appliance is in programme selection

mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

The Auto function

This function decreases energy

consumption by deactivating automatically

the appliance when it is not operating.
The function comes into operation:

• When the programme is complete.

• After 5 minutes if a programme was not

started.

End of the programme

When the programme is complete, the

Auto function switches the appliance off.

Close the water tap.

HINTS AND TIPS

General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to protect the environment.
• Washing dishes in the dishwasher as

instructed in the user manual usually

consumes less water and energy than

washing dishes by hand.

• Load the dishwasher to its full capacity

to save water and energy. For best

cleaning results, arrange items in the

baskets as instructed in the user

manual and do not overload the

baskets.

• Do not pre-rinse dishes by hand. It

increases the water and energy

consumption. When needed, select a

programme with a prewash phase.

• Remove larger residues of food from

the dishes and empty cups and glasses

before putting them inside the

appliance.

• Soak or slightly scour cookware with

firmly cooked-on or baked-on food

before washing it in the appliance.

• Make sure that items in the baskets do

not touch or cover each other. Only

then can the water completely reach

and wash the dishes.

• You can use dishwasher detergent,

rinse aid and salt separately or you can

use the multi-tablets (e.g. ''All in 1'').

Follow the instructions on the

packaging.

• Select a programme according to the

type of load and the degree of soil.

15

Summary of Contents for ST4512IN





























Reviews: