Smeg ST4512IN, User Manual

Page: 12 / 28

CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
Dry Assist is automatically activated with
all programmes excluding (if
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
CAUTION! If children have
access to the appliance, it is
advised to deactivate Dry
Assist as opening the door may
pose a danger.
How to deactivate the Dry
Assist
Make sure the appliance is in user mode.
1. Press the programme button four
times.
The indicator starts to flash.
2. Wait until the indicator continues to
flash and the remaining programme
indicators are off.
The indicator shows the current
setting:
• is off = Dry Assist is off.
• is on = Dry Assist is on.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in the
baskets.
After starting the programme, the
appliance recharges the resin in the water
softener for up to 5 minutes. The washing
phase starts only after this procedure is
complete. The procedure is repeated
periodically.
The salt container
CAUTION! Use rough salt
designed for dishwashers only.
Fine salt increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
12