22
Thermostop
Set as
“ on” =
minimum rinsing temperature
as set
, (see
boiler t emperat ure above) regardless of int ake w at er
t emperat ure; t he cycle durat ion may be a few seconds
longer t han t he nominal lengt h.
Set as
“ off” = t he
minimum rinsing temperature
might be a
few degrees low er t han t he set t ing if hot int ake w at er is not
used.
If t he t hermost op device is set “ off” t he rinsing °t are no longer monit ored and t he user is
responsible for ensuring t hat t he minimum correct °t are maint ained for t he t ank and boiler. It is
part icularly
im port ant
t o
check
t he
int ake
w at er
t emperat ure.
Also refer t o t he insufficient w ashing/ drying / foam in t ank point of t he “ t roubleshoot ing” sect ion :
rest ore °t St op ON and/ or connect t he appliance t o a hot w at er supply.
High speed (FST) or economy (ECO) filling (FILL)
Fast start (FST):
st art s t he dishw asher in less t han t he
st andard t ime; leads t o higher w at er consumpt ion for t he
first cycle st art .
Eco start (ECO):
st art s t he dishw asher in st andard t ime, w it h
no added w at er consumpt ion.
On: enabled – OFF: disabled.
Cycles performed counter
Show s t he count of t he t ot al cycles performed by t he
dishw asher since inst allat ion.
This parameter cannot be modified or reset
unless t he
soft w are is reprogrammed.
USER program duration customisation (optional, only if installed)
USER. 03.10
is t he only program w hich can be cust omised.
Scroll t hrough t he set up paramet ers t o display
USER.P1,
P2…..
follow ed by t w o dashes (e.g.
P2--
). Keep pressing t he P
but t on unt il
USER
appears follow ed by t he durat ion
(e.g.
USER. 03.10
).
