background image

23

TECHNICAL ASSISTANCE AND SPARE PARTS

Before leaving the factory, this equipment was tested and adjusted by skilled personnel so as to

guarantee the best operating results. 

Original spare parts can only be found at our technical service centres and authorized stores. Every

repair or adjustment necessary thereafter must be carried out with the greatest care by qualified

personnel. 

For this reason we recommend  you always contact the dealer you purchased it from or our nearest

service centre stating the make, model, series and type of problem experienced with the equipment. The

relevant specifications are stamped on the information label attached on the underside of the appliance

and on the label attached to the packing box. This information will allow the technician to procure the

appropriate spare parts and guarantee  that the right action is taken promptly. It is recommended that you

note these specifications below so that they are readily available at all times.  

MAKE: .......................................................

MODEL: .................................................…

SERIES: ...................................................

Summary of Contents for SGR30













Reviews: