background image

18

INSTALLATION

TECHNICAL DATA FOR INSTALLERS

Installation and maintenance listed in this section
must only be carried out by qualified personnel
(law n° 46 and D.P.R. 447). 
A faulty installation can cause damage to
persons, animals or objects, towards whom the
manufacturer cannot be held responsible. 
The cut-off or automatic control devices of the
appliance  can only be modified by the
manufacturer or by a duly authorized supplier.  

3) INSTALLING THE BARBECUE 

Take the barbecue out of its packaging, unpack

the various loose parts, then make sure  it is not

damaged. In case of doubt do not use the

appliance and contact a qualified technician. 

Packaging (cardboard, bags, expanded

polystyrene, nails...) must not be left within

children's reach as they are potential sources

of danger. 

An opening in the table top of the piece of modular

furniture must be made  with the dimensions

indicated in fig. 2, making sure that the dimensions

of the space required to install the appliance are

observed. 

This is a Class 3 appliance and is therefore

subject to all the requirements set by the

standards for these appliances. 

FIG. 2

FIG. 3

Summary of Contents for SGR30













Reviews: