Use
40
On first installing, within two minutes of
powering on the hob, hold down the
Increase
and
Decrease
keys
for
the first cooking zone (the one near symbol
).
The cooking zone display shows the
number of the setting currently being
modified (
1 = Automatic control lock, 2 =
Showroom, 3 = ECO-logic
) with its setting
at the side (
: activated,
:
deactivated).
For example,
indicates that the
Automatic control lock
is deactivated.
Press the
Increase
or
Decrease
key
to change the settings for value
or
.
If the
ECO-logic
parameter is modified you
can select the following values
(2.8
kW),
(4 kW),
(maximum
consumption). To advance and change the
subsequent settings, press the
Control lock
key .
Practical advice for using the hob
• The diameter of the base of the
saucepan must correspond to the
diameter of the cooking zone.
• When buying a saucepan, check
whether the diameter indicated is that of
the base or the top of the container, as
the top is almost always larger than the
base.
• The base of the cookware must be thick
and completely flat. It should also be
clean and dry. The hob should be clean
and dry as well.
• When preparing dishes with long
cooking times, you can save time and
energy by using a pressure cooker,
which also makes it possible to preserve
the vitamins in the food.
• Make sure that the pressure cooker
contains enough liquid as, if there is not
enough and it overheats, this may cause
damage to both the pressure cooker and
the cooking zone.
• If possible, always cover saucepans with
a suitable lid.
• Choose a saucepan suitable for the
quantity of food to be cooked. A large,
half-empty saucepan leads to a waste of
energy.
• Do not use cast-iron cookware or
cookware with a rough base.
If the hob is already installed and
in use, cut the power supply to the
hob. Switch the power back on
and proceed as indicated above
within two minutes.