background image

14

Instructions for the user

7. USING THE OVEN

7.1

Before using the appliance

•  Remove any labels (apart from the technical data plate) from trays, dripping pans and the cooking

compartment.

•  Remove any protective film from the outside or inside of the appliance, including from accessories

such as trays, dripping pans, the pizza plate or the base cover.

•  Before using the appliance for the first time, remove all accessories from the oven compartment and

wash them as indicated in “9. CLEANING AND MAINTENANCE”.

Heat the empty appliance to the maximum temperature

 in order to remove any manufacturing

residues which could affect the food with unpleasant odours.

7.2

Oven runners

The oven features 5 runners for positioning
trays and racks at different heights. The
insertion heights are indicated from the
bottom upwards (see figure).

models with frames

models with guides

7.3

Storage compartment (on some models only)

The storage compartment is in the bottom of
the cooker. It provides storage space for the
appliance’s metal accessories and must not
be used to store flammable materials, cloths,
paper etc.

Do not open the storage compartment when the oven is on and still hot. The temperatures inside it may
be very high.

7.4

Cooling system

The appliance is equipped with a cooling system which comes into operation as soon as a cooking
function starts. The fan causes a steady outflow of air that exits from the rear of the appliance and which
may continue for a brief period of time even after the appliance has been turned off.

Summary of Contents for SCD60CMX8

























Reviews: