Smeg S9GMXU9, Manual

Page: 11 / 22

Installation
13
EN
5. Respect the heights indicated in the
figures using the appliance’s dimensions
as a guide. (Type of screw
recommended
1
/
4
”).
(Rear view)
6. Correctly position the range so that the
two screws perfectly align with the anti-
tip brackets on the range.
Instructions for floor mounting
(secondary system)
The secondary anti-tip device is to be
attached to the floor when it is not possible
to install the primary system. After having
positioned and leveled the appliance the
bracket has to be anchored to the floor and
engaged in the slots at the rear of the
appliance.
1. Assemble the fastening bracket as shown
in the figure. Join the two parts without
tightening them too much since there will
be other adjustments to make.
2. After having positioned and leveled the
appliance, move the bracket close to the
rear of the appliance and anchor it to the
floor.
NOTE : According to the type of
floor, the installer should supply the
suitable fastening systems (Type of
screw recommended
3
/
8
”).