Smeg S9GMXU9, Manual

Page: 10 / 22

Installation
12
Instructions for wall mounting (primary
system)
The anti-tip brackets are to be attached to
the rear wall as shown. The height of
bracket location from the floor is
determined after the range legs have been
adjusted to the installation height as shown
in the installation instructions and the range
has been leveled.
1. Level the range using the adjustable
leveling legs.
2. Fasten the plates supplied to the rear of
the appliance, aligning them with the slits
on the sides.
3. From the floor, measure the height of the
notch found on the bracket. This notch
corresponds to the centerline of the holes
for the screws that will fasten the brackets
to the wall.
4. Attach the two anti-tip brackets to the
wall using an appropriate fastener (for
example, screws appropriate for the
type of wall).