Instructions for the installer
34
3.2
Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed according to the dimensions shown in Figures
1
and
2
.
580÷583
854÷864
560 min
500
80÷90
580÷583
560 min
854÷864
595
545
21
6
The fastening is carried out with 4
screws at angle “
C
” of the oven door
frame, after dismantling of the lateral
panels fixed with screws “
A
” and the
supports “
B
” as shown in figure 3. To
reassemble the lateral panels ensure
that the pins positioned inside the
panels are correctly lodged with
supports “
B
” afterwhich retighten the
screws “
A
”.
3.
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.