Rev 0.0
19
INSTALLATION INSTRUCTIONS
EN
5
.2.1.2 Connecting the drain hose
Connecting to a drain
Insert the relative hose into a drain with a minimum diameter of
4 cm
(1-37/64”)
(ref. A fi g. 5-09); alternatively, place the hose on the sink (ref. B fi g. 5-09) using
the supplied hose support (see fi g. 5-10), but taking care to avoid obstructions
or excessive curving. Make sure the hose cannot fall out. For this purpose, the
hose support is fi tted with a hole (ref. A fi g. 5-10) which can be used to fi x it
to the wall or the tap with a piece of string. The free end must lie at a height
ranging from of
30 to 100 cm
(from of 1-7/32” to 3-59/64”)
(see fi g. 5-09)
and must never be immerged in water. If horizontal extension hoses with a
maximum length of 3m are used, position the drain hose at a maximum height
of
85 cm
(3-11/32”)
above the fl oor.
Fig. 5-09
A
B
min O4 cm
1-37/64”
min 30 cm
1-7/32”
MAX 100 cm
3-59/64”
Fig. 5-10
A
Summary of Contents for PLA68XU
Page 3: ...2 Rev 0 0 EN...
Page 20: ...2 Rev 0 0 EN...
Page 54: ...36 Rev 0 0 USER INSTRUCTIONS EN Fig 5 02 Fig 5 03 Fig 5 04 A B A...
Page 61: ...2 Rev 0 0 EN...
