Smeg PLA68XU, Instruction Manual

Page: 12 / 97

Rev 0.0
11
USER INSTRUCTIONS EN
To cancel or change the delay of a program once it has begun:
press the start/pause button (ref. 2 fi g. 2-02) for a few seconds until the
program delay indicator light (ref. 6 fi g. 2-02) and the set program indicator
light (ref. 4 fi g. 2-02) stop fl ashing and remain lit; press the delay program
button (ref. 6 fi g. 2-02) to modify or cancel the set delay (indicator lights 3,
5, 8 fi g. 2-02 off);
press the
start/pause button (ref. 2 fi g. 2-02) to start the program. If a
delay is set, the program delay indicator light (ref. 7 fi g. 2-02) and the set
program indicator light (ref. 4 fi g. 2-02) begin fl ashing; if the program delay
is cancelled, only the program indicator light (ref. 4 fi g. 2-02) fl ashes to show
that it has started.
To enter the delay when the program has already begun , proceed as
follows.
If the program to run is the same as the current one:
press start/pause (ref. 2 fi g. 2-02) and hold it down for a few seconds until
the indicator lights of programs four and fi ve (ref. pr. 4, pr. 5 fi g. 2-03, marked
“end”) light up;
cancel the current program (see section 2.2.6 “Canceling the current pro-
gram”) and wait for the cycle to fi nish;
select the program once again;
select the required delay;
press the
start/pause button (ref. 2 fi g. 2-02) to start the program.
If the program to run is different from the current one:
press start/pause (ref. 2 fi g. 2-02) and hold it down for a few seconds until
the indicator lights of programs four and fi ve (ref. pr. 4, pr. 5 fi g. 2-03, marked
“end”) light up;
change program;
select the required delay;
press the
start/pause button (ref. 2 fi g. 2-02) to start the program. The
dishwasher will drain and continue with the required delay and the new pro-
gram.
•
•
•
•
•
•
•
•
•
•
•