Rev 0.0
9
USER INSTRUCTIONS
EN
If you open the door while the appliance is working, you must close
it and start the program again by pressing
start/pause
(ref. 2 fi g.
2-02). The program will resume from where it was interrupted.
If the temperature in the tray exceeds 50°C (122°F), the program will
resume after about 30 seconds.
2.2.3
End of program
The end of the program is signaled by a short beep. Additionally, the indica-
tor light of the “daily wash” and “extreme wash” programmes (marked “end”)
fl ashes.
2.2.4 Interrupting
a
program
To interrupt the current program:
press the
start/pause
button (ref. 2 fi g. 2-02); the indicator light of the cur-
rent program remains on (confi rmation beep); at this point, start the cycle by
pressing
start/pause
(ref. 2 fi g. 2-02), or change or cancel the program.
2.2.5 Changing the current program
To change the current program:
interrupt it (see para 2.2.4 “Interrupting a program”);
select a new program (see para 2.2.2 “Selecting and stating a program”).
•
•
•
Summary of Contents for PLA68XU
Page 3: ...2 Rev 0 0 EN...
Page 20: ...2 Rev 0 0 EN...
Page 54: ...36 Rev 0 0 USER INSTRUCTIONS EN Fig 5 02 Fig 5 03 Fig 5 04 A B A...
Page 61: ...2 Rev 0 0 EN...
