manualshive.com logo in svg

Smeg Oven, Instructions For Use Manual, Page: 41 / 44

Share
Download
Smeg Oven Instructions For Use Manual Download Page 41

Instructions for the installer

EN

43

12. ADAPTATION TO DIFFERENT TYPES OF GAS

BEFORE PERFORMING ANY OPERATIONS, SWITCH OFF THE POWER
SUPPLY TO THE APPLIANCE.

Appliance set for gas:

NG – 1.0 kPa 

(see label on product)

In case of operation with other types of gas, the burner nozzles must be changed
and the minimum flame adjusted on the gas taps.
To change the nozzles, proceed as described in the following paragraphs.

12.1 Replacing the hob nozzles

1

Remove the pan stands, and
remove all burner caps and
flame-spreader crowns to access
the burner casings.

2

Unscrew the nozzles using a 7
mm socket wrench.

3

Replace the burner nozzles
according to the type of gas to be
used (see 12.2 Burner and
nozzle characteristics table).

4

Replace the burners in the correct position.

12.2 Burner and nozzle characteristics table

For burner arrangement, see “Instructions for the user - 6.4 Cookware diameters”.

Burner

NG – 1.0 kPa

Nominal gas

Consumption (MJ/h)

Turn-down gas 

consumption (MJ/h)

Injector

(mm)

1

Auxiliary

3.9

1.3

0.90

2

Semi-rapid

7.5

1.6

1.20

3

Rapid

12

2.7

1.55

4

WOK

15.2

5.7

0.80 + 1.65

5

Fish pan

7.8

2.9

1.26

Burner

ULPG – 2.75 kPa

Nominal gas

Consumption (MJ/h)

Turn-down gas 

consumption (MJ/h)

Injector

(mm)

1

Auxiliary

3.9

1.3

0.54

2

Semi-rapid

6.3

1.6

0.68

3

Rapid

10.8

2.7

0.88

4

WOK

15.2

5.7

0.46 + 0.94

5

Fish pan

6.8

2.9

0.72

Summary of Contents for Oven













































Reviews:

No comments