6 - EN
cycle starts so that the milk starts to
become warm. If the dried ingredi-
ents are added too fast or in large
quantities, the rotation of the whisk
may stop or detach from its base.
Manual function
• Remove the lid (4) and pour milk into the
pitcher (2), make sure to refer to the level in-
dications printed on the inside of the pitcher.
• Put the lid back on (4).
Hot or cold cycles can be selected.
Hot Manual:
• To start the manual program (M), with heat-
ing function, press the START/STOP button,
the LED (8) switches on with a fixed light;
the whisk speed and temperature increase
proportionally to the duration of the cycle.
The user can stop the cycle by pressing the
START/STOP button as soon as he decides
preparation is satisfactory.
Cold Manual:
• By holding the START/STOP button down
for approx. 3 seconds; the whisk starts up
to froth the milk without heating it and the
LED (8) flashes for the entire duration of
the cycle. The user can stop the cycle by
pressing the START/STOP button as soon
as he decides preparation is satisfactory.
• In both cases, after a certain peri-
od of time, the manual function is
interrupted automatically to pre-
serve safety and functionality of the
product.
• An acoustic signal and the switch-
ing off of the LED (8) indicate the
end of the cycle.
• Successively, proceed according
to that described for the milk.
Cleaning and maintenance
During the working phase, it is
possible to remove the measuring
cap (5) to add powdered ingredi-
ents (e.g. soluble coffee, soluble
cappuccino, soluble tea, etc.).
CLEANING AND
MAINTENANCE (Fig. 1)
Before carrying out any cleaning
operation, ALWAYS disconnect the
plug from the power outlet and al-
low the appliance to cool down.
Never immerse the motor base (1)
in water or other liquids.
The instruction manual contains appropriate
instructions and measures for cleaning and
maintenance operations and operations
recommended to the customer by the producer.
Any other intervention must be performed by a
representative of an authorised service centre.
• Remove the whisk (3).
• Remove the carafe (2) from the motor base.
• The whisk (3), the lid (4), the measuring cap
(5) and the pitcher (2) are dishwasher safe.
• The motor base (1) can be cleaned by first
using a damp cloth and then a dry one. Do
not use detergents or abrasive materials.
