manualshive.com logo in svg

Smeg KSEGU24X, Instruction Manual, Page: 9 / 11

Share
Download
Smeg KSEGU24X Instruction Manual Download Page 9

EN

9

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to 

the chimney using a

rigid 6” duct. (not supplied)

• Install the damper 10a ø 6”.

• Fix the duct in position using sufficient pipe clamps.

Electrical connection

• Remove the cover from the Field Wiring Compartment 

with a phillips screwdriver.

• Feed the Power Supply Cable through the electrical 

knockout. Connect the Power Supply Cable to the ran-

ge- hood cable. Attach the Power Supply Cable grounding 

lead to the green screw provided. Attach the White lead of 

the power supply to the White lead of the rangehood with 

a twist-on type wire connector. Attach the Black lead of the 

power supply to the Black lead of the rangehood with a 

twist-on type wire connector.

• Replace the cover.

EN 

1

12

Electrical connection 

• Remove the cover from the Field Wiring Compartment with a phillips

screwdriver. 

• Feed the Power Supply Cable through the electrical knockout. Connect

the Power Supply Cable to the range- hood cable.  Attach the Power

Supply Cable grounding lead to the green screw provided. Attach the

White lead of the power supply to the White lead of the rangehood with a 

twist-on type wire connector. Attach the Black lead of the power supply 

to the Black lead of the rangehood with a twist-on type wire connector. 

•  Replace the cover.

Summary of Contents for KSEGU24X












Reviews:

No comments