38
*
This maybe caused by burnt on remnants of food. This will not
affect the working of the appliance. However you should make
sure that the cleaning instructions are being followed regularly.
o
Only two of the zones on my hob are working
*
You should recheck that the terminal screws are all fully
tightened between the links.
o
ER03 showing
*
Refer to the “Protection against accidental operation of the hob”
section.
o
E2 showing
*
Refer to the “Electronic current’s temperature sensor” section.
o
“C” or “-“ symbol showing
*
Refer to the “Configuration menu” section.
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and visit
www.applico.co.nz
to find a Service Agent nearest
to you.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
