34
o
Place a fixing bracket (B) over the hole in each corner of the
underneath of the hob. Then place a screw (C) through the hole
and fixing bracket (B). Tighten the screws partially, so that the
fixing brackets stay in place. IMPORTANT: Do not tighten the
screws fully.
o
Carefully turn the hob back over and then
gently lower it into the aperture hole that you
have cut out.
o
On the underneath of the hob, locate the fixing
brackets (B) and turn them so that they locate
on the underneath of the worktop and the hob.
o
Fully tighten the screws (C) to secure the hob into position.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Applico
Ltds instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance must be wired into a 32 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o
The spur outlet must still be accessible even when your hob is
located in its operating position.
