33
o
IMPORTANT: Underneath the appliance there must be a
partition made of insulating material (e.g. wood). There must be
a gap of at least 17 mm between the underneath of the
appliance and this partition.
o
IMPORTANT: You must make sure that there is a 5mm gap
below the underneath of the worktop at the front edge of the
hob for ventilation purposes. The ventilation gap at the rear of
the cupboard underneath the hob should also be observed (as
shown in the pictures on page 27).
o
Carefully turn the hob upside down and place it on a cushioned
mat.
o
Apply the sealing strip provided around the edge of the
appliance.
o
The protective covering must be removed from both sides.
o
Do not leave a gap in the sealing agent or overlap the thickness.
o
IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
(B) Fixing
bracket
(C)
Screw
