Smeg K43X Instruction Booklet Download Page 14

14

 

 

9. PRECAUTIONS 

Read  this  booklet  carefully  as  it  provides  information  on  the  safety  and  use  of  the 
appliance. Keep carefully for future reference. 

Incorrect  installation,  servicing,  maintenance,  use,  cleaning  and  any  tampering  or 
modifications can cause malfunctions, damage and injury. 

The appliance is intended for professional use and must be used by qualified personnel. 

 

The  appliance  is  not  suitable  for  use  by  people  with  reduced  physical  or  mental 
capacity  or  lacking  experience,  unless  instructed  regarding  the  operation  of  the 
appliance by the personnel in charge of their safety. 

 

Do not leave the appliance unattended in the presence of children and make sure 
that they do not use or play with it. 

 

It is recommended not to place heat sources near to the appliance. 

 

Under no circumstances leave flammable materials near the appliance: it may be a 
fire hazard. 

It  is  recommended  that  you  disconnect  the  power  supply  if  the  appliance  is  to  remain 
unused for a long time (several days for example). 

The manufacturer declines all responsibility for damage to persons or things caused by 
failure to comply with the above instructions or due to tampering with even just one part 
of the appliance and the use of non-original spare parts. 

This appliance complies with current EC directives. 

10. FIRST USE 

Before putting the appliance into operation, make sure that all the checks have been carried 
out to ensure that the system and the installation comply with statutory regulations and the 
technical and safety instructions provided in this manual. 

There should be no plastic bags, instruction manuals, plastic film or anything else inside 
the appliance. 

All packaging materials must be removed, including the protective film on the walls of the 
appliance. 

The vents and ventilation slots should be open and free from obstructions. 

 

 

Instructions for the user 

EN 

Summary of Contents for K43X





















Reviews: