Smeg Glass Ceramic Induction Hob SE2642ID2 Instructions For Fitting And Use Download Page 9

Operation

GB

25

Automatic switch-off (timer) 

The automatic switch-off device is used to automatically switch off any
cooking zone after a stipulated period of time. Cooking times ranging from
1 minute to 99 minutes can be set.

1. Switch on the hob.
2. Switch on one or more cooking zones and set the required power set-

tings.

3. Press the 

timer selection button

  . The standby dot of the timer will

light up.
Press the button again until the timer indicator lamp of the required
cooking zone blinks.
Important! Timer  indicator lamps can only blink if the cooking zones have
already been switched on (power setting higher than 0).

4. Then immediately use the 

minus button

   or the

 plus button

  

to 

set

the cooking time at between 1 and 99 minutes.
With the plus button the display will commence at 01, and with the minus
button it will commence at 30.
The setting will be reset if the plus and minus buttons are pressed simul-
taneously (00).

5. In order to program the automatic-switch-off device for another cooking

zone, press the 

timer selection button

   repeatedly until the timer indi-

cator lamp for the required cooking zone blinks. Then use the 

minus but-

ton

  

or 

the plus button

   to set the required time.

6. The cooking zone will be switched off when the time has lapsed. A signal

will sound for a while and can be switched off by pressing any button
(except for the on/off button).

Please note
• In order to check the time that has lapsed (automatic-switch-off device)

press the 

timer selection button

   repeatedly until the timer indicator

lamp for the required cooking zone blinks. The setting displayed can be
read and changed.

• Terminating the function of the timer: select the respective cooking zone

(timer indicator lamp blinks) and press the plus and minus buttons once at
the same time.

Minute minder (egg timer) 

1. Switch on the hob.
2. Press the 

timer selection button

   until the minute minder lamp blinks

with this button. Use the 

minus button

  

or 

the plus button

   to set

the time in minutes.

3. Once the time has lapsed a signal will sound for a while and can be swit-

ched off by pressing any button (except for the on/off button).

Note!
The minute minder remains in operation when the induction cooker is
switched off. Switch the hob on with the 

on/off button

   to adjust the time.

Timer indicator lamp

Stand-by dot for the automatic  

Minute minder lamp

switch-off device

Summary of Contents for Glass Ceramic Induction Hob SE2642ID2


















Reviews: