Smeg Glass Ceramic Induction Hob SE2642ID2 Instructions For Fitting And Use Download Page 8

24

Operation

GB

STOP function 

The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue. 
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.

1. Pots and pans are on the cooking zones and the required power levels

have been set.

2. Press the 

STOP button 

. The letters S-T-O-P or S-T-O will be shown

one after another instead of the cooking levels previously selected. 

3. The interruption is ended by firstly pressing the 

STOP button 

 and

then pressing any 

other button

 (except the on/off button).

The second button must be pressed within 10 seconds, otherwise the
hob will switch off.

Childproof lock 

The childproof lock serves the purpose of preventing children from switching
on the hob either accidentally or intentionally. The controls are blocked.

Switching on the child-safety lock

1. Press the 

on/off button

   in order to switch on the childproof lock.

2. Then immediately press the 

plus button

  

and 

the 

minus button

 

simultaneously.

3. Then press the 

plus button 

 in order to activate the childproof lock.

The power setting displays will indicate an L for child lock, the controls
will be inaccessible and the hob will switch off. 

Switching off the childproof lock

4.

Press the on/off button

  .

5. Then immediately press the 

plus button

  

and 

the

 minus button

 

simultaneously.

6. Then press the 

minus button 

 in order to deactivate the childproof

lock. The L will go off.

De-activating the childproof lock for one cooking procedure only

This is only possible if the childproof lock has been switched on in
accordance with items 1-3.
• Press the 

on/off button

  .

• Then immediately press the 

plus button 

 and the 

minus button

 

simultaneously.
Now the user will be able to switch on a cooking zone (to do so, select a
cooking zone and set the power level).
When the hob is switched off the childproof lock will be activated again
(switched on).

Note!
In the event of a power cut the childproof lock will be cancelled, i.e.
deactivated.

Summary of Contents for Glass Ceramic Induction Hob SE2642ID2


















Reviews: