Smeg FSP9610X-1, Manual

Page: 30 / 48

Cleaning and maintenance
32
4.5 Pyrolytic cycle
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven cavity.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic cycle setting
1. Turn the function knob to symbol . The
display automatically shows the
symbol and the wording
alternated with the minimum duration of
the pyrolytic function (2 hours)
2. Press the or key within
5 seconds to set the cleaning cycle time
from a minimum of 120 minutes to a
maximum of 3 hours and 30 minutes. The
set minutes will be indicated by the
internal segments of the clockface, while
the hours will be indicated by the
relevant numbers flashing (1, 2 or 3).
3. After selecting the pyrolytic cycle
duration, the thermostat indicator light
starts flashing and the oven starts heating
up (approx. 5 seconds after the last
intervention by the user).
4. To confirm pyrolytic cycle start, press the
key or do not touch the display for
at least 5 seconds
.
5. One minute after the pyrolytic cycle has
started the door is locked (the door lock
indicator light comes on) by a device
that prevents the door from being
opened.
Pyrolytic is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve. This
process makes it possible to clean
the inside of the oven very easily.
Improper use
Risk of damage to surfaces
• Remove any large amounts of food
residues or spills from previous cooking
operations from the inside of the oven.
Recommended pyrolytic cycle
duration:
• Light dirt: 120 minutes.
• Average dirt: 165 minutes.
• Heavy dirt: 210 minutes.
It is not possible to select any
function once the door lock device
has been activated.