User instructions
6. Troubleshooting
The dishwasher is equipped with a self-diagnostics system that is
capable of detecting and signalling a number of possible faults.
TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM
FAULT
DESCRIPTION
Er 01
The anti-flooding system (where present) has been tripped service.
Er 02
The water level limitation system has tripped.
Er 03
The appliance cannot heat the water.
Er 04
The temperature sensor is disconnected.
Er 05
The appliance cannot take in the water.
Er 06
The appliance cannot drain the water from the tank.
Er 07
The dishwasher cannot measure the precise water quantity that
has been loaded.
Er 08
Problem on the water distribution system to the baskes.
Er 09
Water intake system malfunction.
If an alarm occurs the appliance interrupts the program in progress
and signals a fault.
•
Alarms
E1, E2, E3, E4, E8
and
E9
interrupt the current program
immediately.
•
The
E5
,
E6
alarms interrupts the running program once the cause
is resolved, it w ill bring bach the execution of the program.
•
The alarm
E7
is visualized at the end of the cycle that comes, how ever,
brought to the end since the operation of the dishw asher is not harmed.
To
“reset” an alarm is necessary:
•
Open and close the door, or turn off and on the machine. At this point is
possible to program the dishw asher again.
If the malfunction persists, contact your authorised Service Centre.
39
