User instructions
ENERSAVE
At the end of the drying cycle, a special device
automatically releases
the door
, which opens slowly and smoothly by a few centimetres. This
ensures
perfect drying
and greater control of rinsing temperatures.
Once the door has opened, the dis hwasher emits a short. The option is
activated
by pressing key and the relative light
illuminates
to indicate
its activation.
When the function is activated,
opening of the door must not be
impeded in any way
; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening
as this
would dam age the mechanism. Wait for the pushers to retract before re-
closing the door.
"Flexi Tabs"
The option is optimised for use of detergents which are complete
with salt and rinse aid, known on the market as, "triple action", etc.
With this option activated, any salt and rinse aid If you wish to use
detergents which already contain salt and rinse aid already in the
dishwasher will not be used.
-
N.B.:
even with the "
Flexi Tabs"
option selected, the
regenerating salt/rinse aid lights will still stay on if
their containers are empty.
IMPORTANT:
when no longer required, the option must be
disabled
(the light goes out).
If the water hardness has b een set on a value
above H3
, and the
“Flexi
Tab s
” option
is activated, the relative
light
flashes, warning of a setting
error. This products are not suitab le for use with very "hard" water; this
does not prevent
the use of the option, b ut the washing results might
not b e of the b est.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.
18
