User instructions
3.3 Washing programs
The dis hwasher is equipped with a control panel and an
INFORMATION
DISPLAY
from which it is possible to carry out all the power switch-on,
switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has b een added to the
dispenser
.
•
The b askets have b een
correctly loaded.
•
The spray arms are ab le to
rotate freely
and
without ob struction.
•
The dishwasher door is
securely closed
.
LIGHTING
Pressing the
ON/OFF
button will start the dishwasher and will lit up the
dishwasher pilot light. After approximately
3 second
from this operation
the
DISPLAY
will be turned on with a visualization that will depend upon
the state of the dis hwasher.
PROGRAMMING
All the programming operations are possible only with closed door. With
open door, on the
DISPLAY
will appear
- - : - -.
SELECTION PROGRAM
The program selection is possible
through the relative buttons.
By pressing the relative button of desired program (see table) it will lid up
the relative pilot light to confirm that the operation did occurred on the
DISPLAY
will appear a program duration forecastin
g (“
h.mm
”).
13
