Smeg DI614, Instruction Manual

Page: 40 / 45

40
EN
Instructions for the User
MALFUNCTION - DESCRIPTION
Litre counter k.o. (for the relevant models only)
The appliance is not able to "measure" the amount of water loaded
accurately. Interrupt the programme and switch off the dishwasher.
Switch the dishwasher back on, programme it again and start the
washing cycle. If the problem persists, contact the after-sales
service.
Alternate washing failure (for the relevant models only)
Interrupt the programme and switch off the dishwasher. Switch the
dishwasher back on, programme it again and start the washing
cycle. If the problem persists, contact the after-sales service.
Level pressure switch k.o.
Contact the after-sales service.
• " Acquastop failure ”, “ Safety device tripped ”,
“ Heating k.o. ”, “ Temperature sensor k.o. ”,
“ Alternate washing failure ” and “ Level pressure
switch k.o. ” trigger an immediate termination of the
programme in progress.
• " Tap turned off ” and “ Drain blocked ” interrupt the
programme in progress and then continue it as soon
as the cause of the problemme has been dealt with.
• " Litre counter k.o. ” is displayed at the end of the
cycle, which however is completed since the problem
does not interfere with operation of the dishwasher.
To reset an alarm, proceed as follows:
• open or close the door, or switch the appliance off and
back on. The dishwasher can now be programmed
again.
If the malfunction persists, contact your authorised Service Centre.